75mm Insulation Hangers With Perforated Base Fixing Insulation Material To Wall & Ceiling

Specification details of the insulation hangers with perforated base

Insulation hangers with perforated base are widely used to attach insulation material with the

use of general purpose adhesive.

Base size in common: 40mmx40mm, 50mmx50mm
Pin diameter in common: 2mm, 2.5mm, 2.7mm, 3mm and 10ga (3.4mm)
Pin length in common: 50mm, 63mm, 90mm, 114mm, 125mm, 175mm, 203mm, 230mm etc.

Surface treatment: zinc coated or copper coated for mild steel material

Applications of the insulation hangers with perforated base

	1. Wipe surface clean Perforated insulation hangers must be applied to a clean, dry, non-painted surface.
	2. Apply adhesive to the bottom of the perforated insulation hangers Spread adhesive onto the perforated base with a putty knife.
	3. immediately stick the insulation hangers in place. Press the hangers into position with a twisting motion to assure an even spread of adhesive. The adhesive should protrude through the performation & beyond the edges of base.
	4. Install Insulation Note: allow adhesive to dry thoroughly before hanging insulation, usually 24-72 hours.
	5. Secure with washers Secure insulation in place with a self locking washer and then bend over or clip off the pins

Package Details Of The Perforated Base Insulation Hangers

PIN LENGTH	CARTON SIZE	QTY/CARTON
38MM	41CMX28CMX17CM	1000PCS
50MM-65MM	41CMX28CMX17CM	500PCS
70MM-84MM	30CMX28CMX29CM	500PCS
90MM-120MM	30CMX30CMX30CM	500PCS
130MM-160MM	30CMX30CMX35CM	500PCS
170MM-203MM	30CMX30CMX28CM	250PCS
OTHERS	SUPPORT CUSTOM	SUPPORT CUSTOM

Huihao Hardware Mesh Product Limited.

1. We choose the best quality materials for making insulation fasteners 2. We do copper plating, zinc coated and phosphating pretreatment for the raw material. 3. We purchase the multi-station cold forging machine to ensure the better mechanical property of shear connector to match the standard (BS EN ISO13918:2008, AWS D1.1, etc.), or as per customer's special requirement. 4. We use the automatic riveting machine to install . 5. After rust prevention, HUIHAO insulation fasteners can suitable for long time ship on the sea. 6. Short delivery time because of our reasonable production flow management.

15 YEARS EXPERIENCE
PROFESSIONAL MANUFACTURER OEM/ODM
ONE-STOP CUSTOM FACTORY
MEET YOUR INDIVIDUAL PROCESSING
ENSURE QUALITY AND PRECISION

About HUIHAO

China HUIHAO was established in 2013. We mainly manufacture and supply Wire mesh and insulation fastener. Our corporate headquarter is located in Changan Industrial area Shijiazhuang Hebei, factory is located in Anping Town Hengshui City. Both sites are adjacent to highway intersections, convenient and near to Tianjin ports.

We have been focused on manufacturing, research and development of wire mesh and insulation fastener more than 10 years, HUIHAO is a leading Chinese insulation fastener manufacturer knowing the European and American standards well, supply a full ranges of wire mesh, insulation pins and washers. They are widely used in HVAC, petrochemical industry, equipments insulation, shipyards, wall insulation etc. And moreover, we develop the solar panel mesh clips. In 2020 we expand our business lines of laser cutting and various customized stamping parts, providing one - stop OEM services.

Our main products are Round & Rectangular Lacing Anchor, Self Locking Washer, various of Cup Head Pin (SS Quilting Pin, Cup Head Weld Pin Insulated, Cup Head Weld Pin Without Insulation), Duct Liner Weld Pin, Perforated Base Pin, Self Adhesive Pin, Wire Mesh, various of Solar Panel Mesh Clip (stainless steel, aluminum and nylon)etc. All of our products are produced by own automatic production.

READ MORE

PACKAGING AND TRANSPORTATION

Standard packaging to ensure products arriving at destination in good condition