Galvanized Steel Conical Tip Capacitor Discharge (CD) Weld Pins

Introduction To The Conical Tip Capacitor Discharge (CD) Weld Pins

Capacitor Discharge (CD) Weld Pins are commonly used to attach blanket insulation to ducts,

ovens, boilers and hot or cold equipment.

The pins are welded in place, the insulation impaled over the pin and then self locking

washers are installed over the pin to secure the insulation.

1. Mild Steel Conical Tip CD Weld Pins With Zinc Or Copper Plated

Materal: Mild Steel

Finish: Zinc coated or copper plated

Washers: Self-locking washers are available in a variety of sizes, shapes, and materials.

Pin Dia: 12GA Or 10GA

Flange Size: 0.165" Or 0.188"

Flange Height: 4mm

Length: 1/2"-10"

	D	FD Width	FD Height	L
	12GA(0.105")	0.165"	4mm	1/2"-8"
	10GA(0.135")	0.188"	4mm	1"-10"

	Copper Coated Mild Steel Conical Tip CD Weld Pins Pin Diameter: 12GA Pin Length:1/2"-8" Flange Width:0.165" Flange Height: 4mm Pin Diameter:10GA Pin Length:1"-10" Flange Width:0.188" Flange Height:4mm
	Galvanized Steel Conical Tip Capacitor Discharge (CD) Weld Pins Pin Diameter: 12GA Pin Length:1/2"-8" Flange Width:0.165" Flange Height: 4mm Pin Diameter:10GA Pin Length:1"-10" Flange Width:0.188" Flange Height:4mm

2. Specification Of The Aluminum Alloy 1100-H14 Conical Tip Capacitor Discharge

(CD) Weld Pins

Materal: Aluminum Alloy 1100-H14

Washers: Self-locking washers are available in a variety of sizes, shapes, and materials.

Pin Dia: 12GA Or 10GA

Flange Size: 0.220" Or 0.250"

	Size	D	FD	L
	12GA	0.105"	0.220"	As Your Request
	10GA	0.135"	0.250"	As Your Request

Aluminum Alloy 1100-H14 Conical Tip Capacitor Discharge (CD) Weld Pins Pin Diameter: 12GA Pin Length:1/2"-8" Flange Width:0.165" Flange Height: 4mm Pin Diameter:10GA Pin Length:1"-10" Flange Width:0.188" Flange Height:4mm

Stud Welding System

the standard, portable CD system consists of:

> The Controller or (Power Unit) which is plugged into the one-hundred-and-ten-volt outlet.

> The CD Gun with Cables is used to command the power unit and deliver weld current,

with the Gun also serving as the Pin holder to properly place the pin during welding.

> Then, on the other side of “the circuit” a ground cable and clamping connection is

attached to the work-surface to complete our Capacitor Discharge connections.

> And finally, special Accessories are used to hold the Pin in the Gun.

15 YEARS EXPERIENCE
PROFESSIONAL MANUFACTURER OEM/ODM
ONE-STOP CUSTOM FACTORY
MEET YOUR INDIVIDUAL PROCESSING
ENSURE QUALITY AND PRECISION

About HUIHAO

China HUIHAO was established in 2013. We mainly manufacture and supply Wire mesh and insulation fastener. Our corporate headquarter is located in Changan Industrial area Shijiazhuang Hebei, factory is located in Anping Town Hengshui City. Both sites are adjacent to highway intersections, convenient and near to Tianjin ports.

We have been focused on manufacturing, research and development of wire mesh and insulation fastener more than 10 years, HUIHAO is a leading Chinese insulation fastener manufacturer knowing the European and American standards well, supply a full ranges of wire mesh, insulation pins and washers. They are widely used in HVAC, petrochemical industry, equipments insulation, shipyards, wall insulation etc. And moreover, we develop the solar panel mesh clips. In 2020 we expand our business lines of laser cutting and various customized stamping parts, providing one - stop OEM services.

Our main products are Round & Rectangular Lacing Anchor, Self Locking Washer, various of Cup Head Pin (SS Quilting Pin, Cup Head Weld Pin Insulated, Cup Head Weld Pin Without Insulation), Duct Liner Weld Pin, Perforated Base Pin, Self Adhesive Pin, Wire Mesh, various of Solar Panel Mesh Clip (stainless steel, aluminum and nylon)etc. All of our products are produced by own automatic production.

READ MORE

PACKAGING AND TRANSPORTATION

Standard packaging to ensure products arriving at destination in good condition