Aluminum Self Adhesive Insulation Pins with 63.5MM Fix Heat Insulating Material

Detail Specification Of the Self Adhesive Insulation Pins

Material:Low carbon steel, Aluminum or stainless steel.
Plating pin: galvanized coating or copper plated
Plating base: galvanized coating,
Self-locking washer: Available in all kinds of sizes, shapes and materials
Base size 2"×2" /50mm square base
Pin size :12GA( 2.7mm) -3mm
Pins length:1" 1-5/8" 1-1/2" 3-1/2" 4-1/2" 5-1/2" 6-1/2" etc
Accept customization for other lengths

How to install the Self Adhesive Insulation Pins

1, Clean the surface: Work surfaces should be clean and dry, free of dust, grease, oil and any other loose matter.
2,Peel off backing:Remove the protective release paper taking care not to touch the adhesive.
3, stick pin in place: Place the hanger in the required position and press the base against the surface to be insulated
4 ,pressure the pin and wait 15-20 minutes,
5.Install insulation and secure with self locking washer

WIPE SURFACE CLEAN.Anchor should be applied to a clean, dry non-porous surface
PEEL OFF RELEASE BACKING.NOTE: Double faced foam tape has a one-year active shelf life
STICK ANCHOR IN PLACE.Select location before contact with surface.Press firmly



APPLY FIRM PRESSURE.20 pounds of pressure should be applied all around the base of the anchor
ALLOW TO STAND 15-20 MINUTES.This will permit better adhesion to take place

Advantages of the Self Adhesive Insulation Pins

images of self adhesive insulation pins

15 YEARS EXPERIENCE
PROFESSIONAL MANUFACTURER OEM/ODM
ONE-STOP CUSTOM FACTORY
MEET YOUR INDIVIDUAL PROCESSING
ENSURE QUALITY AND PRECISION

About HUIHAO

China HUIHAO was established in 2013. We mainly manufacture and supply Wire mesh and insulation fastener. Our corporate headquarter is located in Changan Industrial area Shijiazhuang Hebei, factory is located in Anping Town Hengshui City. Both sites are adjacent to highway intersections, convenient and near to Tianjin ports.

We have been focused on manufacturing, research and development of wire mesh and insulation fastener more than 10 years, HUIHAO is a leading Chinese insulation fastener manufacturer knowing the European and American standards well, supply a full ranges of wire mesh, insulation pins and washers. They are widely used in HVAC, petrochemical industry, equipments insulation, shipyards, wall insulation etc. And moreover, we develop the solar panel mesh clips. In 2020 we expand our business lines of laser cutting and various customized stamping parts, providing one - stop OEM services.

Our main products are Round & Rectangular Lacing Anchor, Self Locking Washer, various of Cup Head Pin (SS Quilting Pin, Cup Head Weld Pin Insulated, Cup Head Weld Pin Without Insulation), Duct Liner Weld Pin, Perforated Base Pin, Self Adhesive Pin, Wire Mesh, various of Solar Panel Mesh Clip (stainless steel, aluminum and nylon)etc. All of our products are produced by own automatic production.

READ MORE

PACKAGING AND TRANSPORTATION

Standard packaging to ensure products arriving at destination in good condition